Back to Home Page

Molybdenum Mill Products

and

Molybdenum Grids & Fixtures

 

A.  Molybdenum Mill Products Are Available at Competitive Prices and Deliveries:
      (Minimum order quantities may apply.  Multiple payment methods.)
                                          Available Grades:  Pure Moly, TZM, MLa
    Sheet           Up to 24" Wide  (0.010", 0.015", 0.020", 0.030", 0.060", 1/8", 3/16")
    Plate            Up to 24" Wide  (1/4", 3/8" in stock, Others Available)
    Flat Bar       Up to 24" Wide   (1/4", 3/8" in stock, Others Available)
    Round Bar  (0.090", 1/8", 3/16", 1/4", 3/8", 1/2", 3/4", 1", 1.25", 1.5" in Stock)
    Element Stock (flat & round)
                       (0.025" x 4" x 138" and 0.030" x 4" x 138" MLa in Stock)
    Nuts            (#10-32NC, 1/4"-20NC, 3/8"-16NC, 5/16"-18NC and 1/2"-13NC in Stock)
    Allthread      (#10-32NC, 1/4"-20NC, 3/8"-16NC, 5/16"-18NC and
                         1/2"-13NC x 36" Lengths in Stock)
    Wire            (0.030", 0.045" and 0.060", 0.080", Moly and MLa Alloy Wire in Stock)
    Washers       (0.015" x 1" Dia. and 1.5" Dia. with 1/4" and 3/8" stud size holes)
    Machined Components (to your drawings and specifications)
    Wire-mesh Moly Screen (from 165 Mesh through #2 Mesh) - Special Order

(Call or email your requirements to 208-765-6854, sales@gvtinc.com 

 

B.  Molybdenum Furnace Grids and Fixtures:

      For applications in vacuum furnaces and inert atmospheres above 2000ºF, Nickel alloy
      manufacturers do not recommend their alloys.  In this case the material of choice is
      molybdenum or a higher temperature molybdenum alloy.  Tungsten is another choice,
      but it is much more expensive.  (We can get that for you too.)

      We supply both single and multiple-tier grid assemblies for furnace applications. 
      Our prices are very cost competitive.  Multiple-tier grids can dramatically increase
      your furnace throughput, if you are now only using a single-tier grid.   We've built
      round grids up to 120" diameter (2 pieces - See photo below).  

      We'll supply to your design or ours.

      We carry material in stock to assemble a 1" x 24" x 36" or a 1.5" x 36" x 48" TZM
      grid with 3" load bar centers in just a few days.   Lead time is subject to availability
      of stock.  Max. lead time if from scratch is approx. 7-8 Weeks ARO, if we need to
      order the materials.  Our prices lately have been  competitive with those for Inconel®
      grids.  Ask for a quote. 
 

      Ask about the unique features in our GVT grid designs that will give you better performance,
      better life and better maintainability.
 
 


 


    If you have unused furnace height available and would like to explore adding more layers of parts into
    your furnace, please contact us at 208-765-6854 or sales@gvtinc.com to learn more about how we can
    help you to accomplish this.



Questions?

If you have questions on the items on this page, please email us at sales@gvtinc.com or give us a call at
208-765-6854 Pacific Time Zone.