back to Used Equipment

Atmosphere Furnaces & Generators, Supplies
(Also see Continuous Page)

 


 

Item # Brand Description Temp Price
17-4133 Surface Gas-Fired IQ Furnace, 30"W x 20"H x 48"D 1750F $50,000
17-4130   Heat Treat Plant Closing, follow link for details    
17-4129 Lindberg 36" x 60" Pit Gas Nitrider   $75,000
17-4114 Holcroft Batch IQ, 36"Wx48"Dx30"H 1800F $55,000
17-4112 Lindberg Atm Box, 36" x 48" x 24", Electric 2500F $49,500
17-4109 Pathways Vacuum Purge Atmosphere Retort, 18" Dia. x 18"L 2100F $5,500
17-4096 WIS Atmosphere Box, 80"Wx96"Hx60"D 1750F $125,000
17-4078 Aichelin Cast Link Furnace Line, 24" Wide 1650F Offer
17-4075 Surface Super 36 Allcase, 36x48x36, rebuilt   $353,825
17-4072 Lindberg Box Furnace, 36"Wx36"Lx36"H 2050F $21,000
17-4071 C.I. Hayes Belt Furnace, 12"W Belt, 12"H 2048F $49,500
17-4067 Thermal Vacuum Purge Atm Sinter / Braze 2910F $9,000
16-4063 Ipsen T4 Integral Quench, 24"x36"x18"H   Inquire
16-4060 AHT Fluidized Bed Furnace Line 1950F $180,000
16-4047 Sauder Car Bottom, 15'D x 10'W x 7'H >1200F $49,000
16-4046 JL Becker Car Bottom, 96"W x 180"L x 66"H 1800F $125,000
16-4045 Ipsen Batch IQ Installation   $1.25mil
16-4044 Various Batch IQ Installation: 6 furnaces, Gas-Fired, plus tempers, washers, etc. 1750F $125,000
ea. fce
16-4022 Systems W. Box Furnace; 60" x 60" x 60" 1650F $42,500
16-3982 N.A. Manuf. Carbottom Furnace; 12'W x 80"H x 12'L TBA TBA
16-3981 N.A. Manuf. Carbottom Furnace; 7'W x 7'H x 12'L TBA TBA
16-3966 SOLO Mesh Belt Furnace, 200mm W x 40mm H 2100F Call
16-3961 Holcroft Batch IQ Furnace, 36"W x 48"D x 30"H 1800F $55,000
16-3960 Johnson Carbottom Furnace, 30'W x 40'L x 15'H 1800F Call
16-3959 Surf. Comb. Super 30 Allcase, 30"W x 48"D x 24"H 1750F $60,000
16-3953 Super Sys. Mounted Continuous Gas Analyzer Units (2 avail.)   $3,900ea.
16-3940 Sauder Batch IQ Line, 24"Wx24"Hx36"L 1850F $125,000
16-3939 Drever "Lift-Off" Atm Box Furnaces, 10'6"Wx35'Lx6'H 1450F $325,000
16-3901 Ipsen T-11 Batch IQ Furnace, 36"W x 24"H x 48"L 2000F $75,000
16-3900 Lindberg Lindberg Pit type Cyclone / Nitriding, 16"D x 20"H 1250F $9,800
16-3892 SOLO Swiss Atm. Line (Austenitize/Carburize/Carbonitride) 300x300x600mm 1000C 75 000 €
15-3878 Blue-M Atm. Vert. Tube Furnace, 2"D x 12"H 2500F $2,500
15-3877 Pathways Atm. Retort Furnace, 12"Wx16"Dx12"H 2100F $10,000
15-3876 CM Fce. Hydrogen Atm. Box 8" x 8" x 8" Retort Area 2000F $5,000
14-3844 SOLO Swiss Quench System, Nitrogen or Oil, 300mm Dia. x 300mm H 2100F 35 000 €
14-3840 Ipsen Atmosphere Int. Quench Furnaces (2 ea.)  610x610x910mm 1050C 55 000 €/ea.
14-3820 Surface Atm IQ Line (Hardening/Temper/Washer/Loader) 1850F $650,000
14-3819 Surface (2) Atm. IQ Furnaces, 62"W x 62"D x 36"H 1850F $250K/Ea.
14-3815 McLaughlin Large Box Atm. Furnace,  166"W x 32"H x 120"L 2000F $165,000
14-3752 Lindberg Electric Atmosphere IQ Furnace, 30"W x 48"D x 30"H 1800F $25,000
14-3751 Pac. Scientific Gas-Fired Radiant Tube Box Furnace, 72"W x 120"L x 42"H 2050F $70,000
14-3742 Lindberg Atm IQ Furnace, 24"W x 36"D x 24"H 1850F $29,900
13-3698 Beavermatic Atm. IQ 36W x 54L x 45H Work Zone, Electric Heat 1850F $25,000
12-3639 Lindberg Atm. IQ, Electric, 24x36x18 with Top Cool Capability 1850F $28,000
13-3692 Denton TS Rotary Hearth; 6ft Dia. x 13"H Work Zone, Carbon Control 2150F $29,000
13-3689 Sgt. & Wilbur 250 CFH Ammonia Dissociator 1750F $3,500
13-3688 Sgt. & Wilbur 4 Ea., 3000 CFH Ammonia Dissociators 1750F T.B.A.
13-3682 L&L Fce. Co. Atmosphere Gas Quench Fce.,   16"W x 26"D x 14"H 2000F $9,500
12-3642 Lucifer Atmosphere Water-Quench Furnace, 18x18x24 1900F $19,500
07-3299 Super Sys. Model DP2000 Portable Dewpoint Analyzer (New)   inquire

 

 

 

Item# 17-4133-2   Gas Fired IQ Furnace

Manufacturer: Surface Combustion
Type: Power Convection Allcase Furnace
Work Zone: 30"W x 20"H x 48"D
Temperature: 1400°F - 1750°F
Burners: Recuperated Eclipse Burners
Controls: Super Systems, Inc.
Details to be added soon.

Price: $50,000 
(includes loading on truck)

 Top

 

 

 

 

 

 

Item# 17-4130-1   Heat Treat Plant Closing

All of this equipment plus some miscellaneous items are available. 1 Lindberg Homo Carb pit furnace 35” x 60” deep (clear working load area.) Electric. 1 Lindberg Homo Carb pit furnace 35” x 48” deep. Electrically heated. Waukeetronic flow meters, nitrogen, air and NG flowmeters on gas panel. Transformers, SCRs, carbon probes and control panels. Furnaces approximately 20 years old. Both completely rebuilt 2 1/2 years ago. All new alloy. Some spare parts and fixtures.

1 C10 Thermal tempering furnace 40” dia x 60” Deep 1450F. Complete with retort and flowmeter for low O2 work. 92 Kw., Scr and control panel 3 years old. Asking $ 130K for all furnaces. Canadian funds. Purchaser to remove and load equipment. All equipment was used for aerospace heat treating. All in excellent, nearly new condition. Some additional items available: oil quench tank with pump and cooler, quench oil, 3 Despatch ovens 30x30x60”high electric. 650F

 Top

 

 

 

 

Item# 17-4129-1   Lindberg Pit Gas Nitrider

- 36″ x 60” pit gas nitrider
- Lindberg Homo Nitrider – electric
- built in late ‘70’s
- Super Systems Gas Nitriding Control system built in 2012. 
- System was operational up until decommissioning last year, when it was replaced with new equipment.

Price includes fixtures shown in pictures.

Price: $75,000         

 Top

 

 

 

Item# 17-4114-1   Holcroft Batch IQ Furnace

- Mfr: Holcroft  Model GPM
- Work Zone: 36"W x 48"L x 30"H
- Load Capacity: 3000 lbs
- Gas Fired: four 8" dia. U-Tubes, Hauck burner with recuperators, 1,350,000 BTU's
- Max Temperature: 1800°F
- Uniformity: +/- 10°F from 950°F to 1650°F
- Quench tank: 2400 gallons
- Quench Oil Temp: 160°F
- Nitrogen top cool. Allen Bradley PLC 1400. SBS quench oil cooler which has never been used. Also included is a spare pusher head. Currently set up for carburizing and nitriding. New in 1998. Excellent condition!
Price: $55,000
         

 Top

 

 

 

 

 

Item# 17-4112-1   Atmosphere Box Furnace, 2500°F

- Mfr: Lindberg  Model# G-364824-A
- Work Zone: 36"W x 48"L x 24"H
- Electrically Heated: 480/3/60, 95 KW
- Max Temp: 2500°F
- Air operated vertical lift door with water cooled faceplate, ceramic multipiece hearth, 20 Globar elements above and below the hearth. Tap style transformer. Digital control and overtemp. Very good condition.
Price: $49,500
         

 Top

 

 

 

 

Item# 17-4109   Atmosphere Box Furnace

- Mfr: Pathways Thermal Technologies, Inc. (support still avail.)
- Work Zone: Approx. 18" Dia. 18"L Retort Size, Horizontal, current racking for 12"W x 12"D x 8"H work area
- Last surveyed: October 2013
- Inert gas: Any, set up for Argon currently
- External furnace: Electra Products Co.
- Model 182525
- Max Temp: 2100°F
- Controls: Honeywell
- Power: 230v / 3 Ph / 60 Hz, 21 KW
- Location: Pacific Northwestern U.S.
Price: $5,500
         

 Top

 

 

 

 

Item# 17-4096-1   Atmosphere Box Furnace

- Manufacturer: Williams Industrial Services
- Natural Gas, 1.8 MBTU's
- Work Zone: 80" wide x 96" high x 60" deep
- Radiant Tube Box Furnace
- Max Temperature: 1750F
- Voltage 480/3/60
- Controls: Mounted and wired in a free standing enclosure. Includes a Honeywell digital controller/recorder, Eurotherm high limit. "Fireye" flame safety mounted in the same enclosure. All necessary pushbuttons, signal lights, relays, motor starters etc. are included.
- Standard front-loading box furnace with vertical lift air-operated door.
- Water-cooled roof-mounted fan circulates the heated air for good uniformity.
- (12) vertical radiant tubes, six on each side. Each burner has spark ignition and there is a flame safety system for flame curtain.
- Endo flowmeter to control atmosphere
- Water-cooled breast plate
- Stationary powered loader for charging the furnace
- Excellent condition

Price: $125,000
         

 Top

 

 

 

 

Item# 17-4078   Aichelin Cast Link Furnace Line

-Manufacturer: Aichelin
-The line consists of a loading table, cast link belt hardening furnace, oil quench, cross conveyor, post wash and two continuous tempering furnaces.
-High belt is 24” wide X 300” long with a capacity of 336 Kg/h. Nitrogen/Methanol atmosphere. Electrically heated 300 kW. Operating temperature of 1650F.
-Quench oil tank holds 7,000 litres. Air/oil quench oil cooler. Post wash has oil skimmer.
-Both tempering furnaces are electrically heated, 57 kW each. Belt widths 20” X 250” long. Maximum operating temperature of 575F.
-Installed in 2005 and currently used for automotive bearings. Complete installed and in operation until March 2017. Excellent condition. 

Best offer
             

 Top

 

 

 

 

Item# 17-4075   Surface Combustion "Super 36" Allcase

Manufacturer: Surface Combustion, "Super 36"
Work Zone: 36"W x 48"D x 36"H
Top Cool, gas-fired, & hot oil
Currently undergoing a rebuild
Vertical U tubes with safety platforms, ladders, all new motors, wiring, components.
New control cabinet with SSi controls and flow scopes
Price: 
$353,825            

 Top

 

 

 

Item# 17-4072   Lindberg Box Furnace

Manufacturer: Lindberg, Model 41-MT-363636-2
Work Zone: 36" x 36" x 36"
Manufactured: 1994
Max Operating Temp: 2050F
Power: 240V, 60Hz , 3Ph
Controls: Honeywell Truline chart recorder, Watlow F4 digital control
Air operated vertical lift front door
Heating: Lindberg MPH elements
Recirculation Fan mounted in the bottom
Processes: hardening, carburizing, carbo-nitriding, normalizing, annealing
Includes retort box 34x34x32 with gas connection
Excellent condition, only used in the jet aviation industry by 1 owner. The retort was purchased with the furnace but was not actually used. The retort is brand-new. The unit has been maintained well.
Includes Clark Hardness ester, Model CPT
Price:  $
21,000                

 Top

 

 

 

 

Item# 17-4071    C.I. Hayes Mesh Belt Furnace

Manufacturer:   C.I. Hayes
Model:  Type LAC Electric Belt Atmosphere Furnace
S/N:  14855
Work Zone:  12” Wide x 12” High
Heated Section:  12 ft.
Cooling Section:  12 ft.
Belt Length:  90ft.
Heat Input:  75 KW
Control Zones:  3
Max. Temperature:  1120C (2048F)
Power:  220V/3Ph/60Hz, 212 Amp.
Floor Space:  9ft Wide x 54ft Long x 10ft High + ductwork
Insulation:   Brick
Condition:  Good
Gas Panel:  Air Products PureFire 5200 Nitrogen/Hydrogen Mixing Panel
Controls:  Eurotherm Temp. Control & Hi-Limit, Obsolete Honeywell Recorder
Other:  Spare Cooling Muffle, Ductwork if purchased before we remove mid-June

Price:  $ 49,500                     Location: Western U.S.

 Top

 

 

 

 

Item# 16-4063   Ipsen T4 Integral Quench Furnace:

Ipsen Model T-4, Gas-Fired Integral Quench Furnace, 
Gas-Fired, 8 Radiant Tubes
Includes loader
Was working when removed from service. It will need minor repairs (the inner door cylinder had to be removed to get it into the warehouse).
Work Zone:  24"W x 36"L x 18"H
Heat Input:  480,000 BTU/Hr
Net Heating Rate:  800 lb/hr
Max. Load at 2000F:  850 lb.
Approx. Shipping Wt:  12,500 lb.
Overall Dimensions:  5'-5"W x 17'-10"L x 11'-8"H
Second furnace for spares available
Price: 
Inquire

Top

 

 

 

 

Item# 16-4060-1   Fluidized Bed Furnace:

A complete fluidised bed heat treatment line only 6 years old, consisting of three fluidised bed furnace, a cooling fluid bed, plus auxiliary equipment.   All furnaces are sized with a 600mm diameter x 1200mm deep work space (24” diameter x 48” deep) and are electrically heated, with SCR control. 

Auxiliary equipment included in offer - cooling fluid bed, work platform, stairs and handrails, piping and wiring, fluidizing air system, water cooling system with air cooled heat exchanger, various work jigs & mesh baskets, ammonia vaporizer.  Current power supply is 415V / 3 phase / 50hz, but equipment can be modified to suit any power supply.  Originally manufactured by Applied Heat Technologies 2010, furnace line ceased operation in 2014, and has been in storage since.  All equipment is in excellent condition.  Prior to sale, the equipment will be fully tested to ensure it is operational, and any faulty parts will be replaced, and a warranty will be offered.  The equipment can be packed into containers for delivery anywhere in the world.  Assistance with shipping, installation, commissioning and conversion to an alternate power supply available if required.

Price: $180,000

Top

 

 

 

 

Item# 16-4047-1   Car Bottom, Gas-Fired:

Manufactured by Sauder this is a gas fired 6-burner car bottom style furnace. Serial Number: 751546 (1975). Working dimensions of 15' D x 10' W x 7'. Completely rebuilt and relined with fibre in 2012 by Onex Inc. Dual Blowers. Was operated at 1200F but capable of much high temperatures (details to come). Very good overall condition although the car needs minor repairs (repair materials included).
Price: $49,500 for quick sale

Top

 

 

 

 

Item# 16-4046-1   J. L. Becker Car Bottom:

Working Dimensions are 96" wide x 180" Long x 66"High with a Maximum Temperature of 1,800 Deg. F. Natural Gas fired with 4.3 Million Btu's. Serial Number: J 2060. Double Ended Car Bottom with Air Operated Doors to accommodate Dual - Full Length Motorized Cars. Each Car is 108" wide x 200" long with Castable Refractory Floor Insulation - Sand Sealed. The Furnace is Fiber/Refractory Lined with 8 Tempest Burners (4) per side wall, firing opposite and opposed. The Exhaust Flues are floor level mounted for excellent temperature uniformity. Temperature Controls : Free Standing Panel Honeywell Digital Controls and Honeywell Tru-line Circular Chart Recorder. 
Price: $125,000

Top

 

 

 

 

Item# 16-4045-1    Ipsen Batch IQ Installation

This 5 year old installation consists of 2 Ipsen carburizing furnaces with working dimensions of 36" X 48" X 36", both gas fired. Four (4) gas fired Ipsen tempers 36" X 48" X 36" capable of 1400F, an Ipsen dunk/spray washer and 2 charge cars. Carburizing furnaces are a "flow through design" using endothermic atmosphere. Atmosphere control is through an oxygen probe/Siemens 3 gas IR system. The entire installation is designed for "lights out operation" meaning it is completely automated. Included is over $100,000 worth of spare parts along with 15 base trays and baskets. The equipment has just been removed and is in immaculate condition. New the system was $3.5 million USD
Price: $1.25 million. 
Vendor will consider selling individual items.

Top

 

 

 

 

Item# 16-4044-1   Batch IQ Installation

We have available a very impressive complete heat treat department consisting of the following; Six (6) batch IQ furnaces all gas fired with working dimensions of 36” X 48” X 32” and capable of 1750F. Eclipse burners. Half of these were manufactured by Holcroft the others build by Ipsen. All have top cools and five of six have 3,000 gallon quench tanks (the sixth has no quench tank). All are set up for Nitrogen/Methanol atmosphere.

Also available are tempers, washers, charge cars, brand new alloy components and mountains of spare parts. Cast and fabricated baskets, base trays and fixturing are also available. Quench oil is also available Houghton 3440. Very recent UPC controls-all top of the line with 15” screens. Everything is in excellent condition and currently in operation.

Vendor will consider selling components individually. 
Asking price for each furnace is $125,000 USD. Please inquire about individual pricing for other items.

Top

 

 

 

 

 

Item# 16-4022-1   Box Furnace

Manufactured by Systems West this unit has working dimensions of 60" high x 60" wide x 60" deep. Electrically heated 480/3/60, 100 KW. Operating temperature of 1650F with a maximum temperature rating of 2000F. Model Number: SW-555-B. Temperature Controls: Honeywell UDC 2000 controller & overtemp, model DR-4200 circular chart recorder. SCR power controller. Free standing NEMA 12 panel.  Air operated vertical rising door.    Fiber lined with solid fire brick hearth. Hoskins #875 coiled wire heating elements on three walls and door. 330 alloy recirculating fan mounted in the roof. Furnace can be operated at 2000 deg. without fan. Excellent condition.
Price: $42,500

Top

 

 

 

Item# 16-3982-1   Carbottom Furnace

Working dimensions of 12’ wide X 80” high X 12’ long. Manufactured by North American Manufacturing. Natural gas heated. Ceramic fibre lined. Very good condition. 
Asking price and more details to come.

Top

 

 

 

 

Item# 16-3981-1   Carbottom Furnace

Working dimensions of 7’ wide X 7’ high X 12’ long. Manufactured by North American Manufacturing. Natural gas heated. Ceramic fibre lined. Very good condition. 
Asking price and more details to come.

Top

 

 





Item# 16-3966-1   SOLO Mesh Belt Furnace:

Built in 1995 this furnace has a max temperature of 1150 C with a main voltage of 3 x 400V - 50 Hz. The power input is 40 kw and has a heating zone power of 3 x 13 kw. The heated length is 4000 mm and the cooled length is 6000 mm with a channel section of 220 x 60/100 mm. The belt width is 200 mm and the working height with the belt is 40 mm. The conveyor belt speed is 90 cm per minute. This furnace was used to anneal stainless steel parts and various other materials (Brazing, Tempering, Hardening). Please call or email for pricing.

Top





Item# 16-3961-1   Holcroft Batch IQ Furnace

A Holcroft Model GPM batch IQ furnace with working dimensions of 36” wide X 48” deep X 30” high. Gross load capacity of 3,000 pounds. Gas fired with four 8” diameter U-Tubes and Hauck burner with recuperators. BTU input 1,350,000 BTU’s. Maximum operating temperature of 1800F. Uniformity from 950F to 1650F +- 10F. Quench tank 3400 gallons. Quench oil temperature 160F. Nitrogen Top Cool. Allen Bradley PLC 1400. SBS quench oil cooler which has never been used. Also included is a spare pusher head. Currently set up for nitriding but capable of carburizing. Installed and in good condition.
Price:     $55,000

Top







Item# 16-3960-1   Carbottom Furnace

Gas fired recuperative, jet recirculating, annealing, normalizing, stress relieving car type furnace. Manufactured by Johnson, Serial number 1667. Working dimensions of 30’ wide X 40’ long X 15’ high. Maximum operating temperature of 1800F. Utility requirements; 480volts, 3 phase, 60 hertz. Natural gas; 1000 BTU/cubic foot. 4 PSIG maximum pressure. Honeywell controls with Allen Bradley SLC 503 PLC. Krom-Schroder flame safety management. Foot print 46’ wide X 50’ long X 36’ high. Furnace has doors at both ends, fiber lined. 4 zones of control. Self propelled car. 
Price:     Please call for pricing

Top







Item# 16-3959-1   Surface Combustion Super 30 Allcase

Surface Combustion Super 30 Allcase with working dimensions of 30” wide 48” deep X 24” high. S/N BC-41088-1. Electrically heated 480v/3ph/60cyle. Operating temperature 1350F to 1750F. Newer style with dual quench cylinders and top cool. Controls are in a free standing panel with Eurotherm digital controllers and over-temp. Multi-pro data logging and carbon control. Includes charge car. Good condition.
Price:     $60,000

Top








Item# 16-3953   Super Systems Mounted Continuous Gas Analyzer Units (x2):

The permanently mounted continuous gas analyzer can be used for carburizing, neutral and ferritic nitrocarburizing heat treat applications. The measurement of the process gas provides calculated values for %C, KN, KC.  In endothermic based atmospheres, the instrument in conjunction with carbon probes can be used to automatically adjust COF to provide the most precise atmosphere measurement.
These units have been used and need calibration.

Price:     $3,900/ea. OBO

Top










Item# 16-3940-1   Sauder Batch IQ Line:

Serial Number 881978-83. Electrically heated 480/3/60/150kW total load. Maximum operating temperature of 1850F. Working dimensions of 24” Wide X 24” high X 36” long. Controls; Mounted and wired in an enclosure attached to the right hand side of the furnace includes a Marathon 10 Pro digital temperature controller, Marathon Carbpro digital carbon controller, Barber Colman analog high limit and a Honeywell digital strip chart recorder. Three power meters are face mounted to the same enclosure which monitor power in each zone of the furnace. A Halmar "SCR" power controller controls power to the heating elements. Two (2) Allen Bradley PLC controllers are mounted in the same enclosure. Standard In/Out Integral Quench Furnace w/Top Cool. This line consists of IQ furnace with top cool, heated quench tank, charge car, dunk & spray washer, temper furnace, SBS oil cooler, scissors table, atmosphere flow panel and several spare parts. Very good condition.

Shipping Dimensions:

Temper Oven: 72"W x 11'H x 72"L
Washer: 80"W x 10'3"H x 120"L
Furnace: 109"W x 11'H x 96"L
Quench: 106" x 10'H x 72"
Top Cool: Skid - 5' x 5' x 6'H
Charge Car: 78"W x 60"H x 86"L 
Misc. skids, flow panel, SBS, spare parts

Price:     $125,000

Top






Item# 16-3939-1   "Lift-Off" Atmosphere Box Furnaces:

Manufactured by Drever.
Effective working dimensions of 10'6" Wide x 35' Long x 6' High.
Gas fired-12,000,000 BTU/Hr.
Max. Operating temperature of 1450F.
Description; Ceramic Fiber Lined, Vertical Rising Atmosphere "Lift-Off" Furnace complete with (26) U-Shaped Radiant Tubes, North American Burner System, (4) Top-Mounted Alloy Circulating Fans, (4) Zones of Control, Stationary Hearth, "Knife-Edge" Atmosphere Seal, and Hydraulic Lifting Cylinders on each end of furnace. 
Furnace is capable of 100,000 lb. loads.
Instrumentation; Free-Standing Control Panel with Honeywell PLC Digital Temperature Controller, and Honeywell Flame Safety System.
Very good condition.
Overall dimensions of 15'11" Wide x 41' Long x 13'6" High.
Approximate weight 70,000 pounds.
Units each can hold up to 100,000# loads and were used prior for tempering/normalizing wire rod and bar stock. 
Both of these have top mounted recirculating fans and are "atmosphere capable", good for FNC work.

Price:     $325,000 each

Top






Item# 16-3901-1   T-11 Batch IQ Furnace:

Model T-11 gas fired batch IQ furnace with an operating temperature of 2000F. Working dimensions of 36"W x 24"H x 48". Voltage 460/3/60. External dimensions of  9’W x 14’7”H (Assembled) x 22’L – Approx. Standard T-11 Ipsen batch type atmosphere furnace with integral hot oil quench. Furnace has "Waukee" flow meters for Ammonia, Endo, Air and Natural Gas. There are a total of twelve (12) Eclipse (SER) single ended recuperative burners with Kanthal APM (Advanced Powdered Metallurgical) vertical radiant tubes. Controls mounted and wired in an enclosure attached to the right hand side of the furnace includes the following a Yokogawa digital temperature control, Yokogawa digital over temp control, Yokogawa digital oil temp control, Yokogawa digital over temp (oil) control, three (3) A.C. Amp meters, one for each quench agitator and all necessary pushbuttons, signal lights, etc. Quench tank is gas fired with an Eclipse burner package. This furnace includes a stationary loader, gas fired Dunk & Spray washer, manuals & drawings. Good condition, just moved to indoor heated storage.
Price:   $75,000 

Top





Item# 16-3900-1   Lindberg Pit Cyclone Nitriding Furnace:

12-ec-1620-12, 480 volts, 27 kw, 3 phase, 1-1/2 h.p. fan motor, max operating temp: 1250 F, working dimension: 16” dia. X 20” deep, approx. Weight: 1700 lbs., heating elements: helical coil type nichrome v, this furnace is equipt with a sealed retort and fan assembly for gas nitriding.
Price:   $9,800 

Top








Item# 16-3892-1    Atmosphere Line (Austenitize/Carburize/Carbonitriding):

Built by Solo of Switzerland this is a Model SOLO 202-30/30/60. This furnace line was manufactured in 1992 and operates at a maximum temperature of 1000°C. The voltage for this line is 3 x 400V - 50Hz, with a maximum load weight of 80 kg. Loading dimensions are 300mm x 300mm x 600mm Height. Line consists of an oil quenching tank – Austenitizing furnace – Nitriding furnace – Washing machine – Forklift – Switch and control panel and gas distribution cabinet – Computer management system for process control : Easytherm CarboBELL Pro. This can be used for Austenitizing – Carburizing – Carbonitriding – Nitriding – Oil quenching – Washing. Very good condition. All manuals included.
Price:   75 000 €                         Location:  Europe

Top





Item# 15-3878    High Temperature Tube Atmosphere Furnace:

Manufacturer:  
Blue-M
Type:
 Atmosphere Vertical Tube Furnace
Max. Temperature: 
2500ºF
Work Zone Size:
 2" Diameter x 12"High
Heating: 
Electric, Globar elements
Tube:
  Ceramic
Atmosphere: 
Air or Any Suitable Purge Gas
Last Use: 
Thermocouple Calibration
Price: 
$2,500

Top







Item# 15-3877  Hydrogen Atmosphere Retort Furnace:

Manufacturer: 
Pathways Thermal Technology
Type: 
Inconel Retort Atmosphere Box Furnace
Work Zone Size: 
 12"W x 16"D x 12"H
Atmosphere: 
Any, but set up now for Argon
Max. Temperature: 
 2100ºF
Heating: 
Electric, Globar elements
Cooling:  
External retort forced gas cooling system
Location: 
 Pacific Northwestern U.S.
Price:   $10,000

Top




Item# 15-3876    Hydrogen Atmosphere Furnace:

Manufacturer:  CM Furnaces
Type:   Hydrogen Atmosphere Box
Retort:  Inconel with o-ring sealed door
Work Zone Size:  8" x 8" x 8" Retort
Max. Temperature:  2000ºF
Uniformity:  Full work zone, prob. +/- 50ºF
                     Lower 6":  prob. +/- 20ºF
Atmosphere:  Wet or Dry Hydrogen or Nitrogen Purge
Controls:   PLC - Automatic with Proface touch screen
Price:  $5,000                      Location:  Pacific Northwestern U.S.

Top







Item# 14-3844-1   Quenching System:

SOLO Swiss Quenching Machine. Model 209-30/30. Quenching machine for self-hardening and oil quenching. System consists of a Quenching Bell furnace - Nitrogen quenching unit - Tempering furnace - Oil quenching unit - Controller / programmer - Operator panel - Temperature controller - Hydraulic control. Can be used for Austenitizing - Annealing - Tempering - Oil quenching - Quenching under nitrogen. Manufactured in 1991. Maximum operating temperature of 2100F. Main voltage 3 X 400V-50Hz. Power input; 10kW. Working dimensions of 300mm diameter X 300mm high. Maximum loading weight 20kg. Protective gas; N2 or mixture N2 to max. 5 % H2. Overall dimensions of 2200mm high X 2070 wide X 2250mm deep.  Good condition, entirely revised, delivered with the manufacturer's instruction manual. Mounting, commissioning and training worldwide upon request. 
Price: 35 000
   Euros                          Location:  Europe 

Top







Item# 14-3840-1    Ipsen Atmosphere Integral Quench Furnaces (2 ea.):

Ipsen TQ-5-EM Furnaces (2 available). Located in the UK. Two Ipsen TQ-5-EM straight through batch IQ furnaces, with loading system, tempering furnace and washing machine. Load size 610mm (w) x 610mm (h) x 910mm (d), rated at 350kg's each and operating temperature up to 1050C. Uniformity +-10C. Electrically heated 172A. 380 volts, 3 phase, 50hz. Set up for Endo Atmosphere. Ipsen "Carbo Prof" control system. Control panels missing and heating elements missing. Brickwork in good condition. 
Price:   £55,000.
 New in 1987. Total refurbishment can be offered, new control panel, gas or electric heating etc.                        Location:  Europe

Top





Item# 14-3820-1    Atmosphere Integral Quench Line:

SURFACE COMBUSTION BATCH IQ FURNACE LINE.
Hardening Furnace:  Serial Number: 12155-1. Working Dimensions: 87” WIDE X 87” LONG X 36” HIGH. Quench Tank Dims.: 20’ WIDE X 12’ LONG X 7’ DEEP. Quench Tank Volume: 12,500 Gallons. Power: 480 VOLT, 3 Phase, 60 Cycle Fuel: Natural Gas - 4,600,000 BTU/Hr. Maximum Temperature: 1,850°F. Fans: Two top-mounted alloy re-circulating  fans. Flow Meters: 2 Nitrogen, 2 Air, 2 Natural Gas, 2 Propane, 1 Endothermic. All have Waukee-Tronic process controls. Controls: Allen Bradley PanelView PLC-5. Yokagawa Instruments. General: Six (6)
30 HP Gold Sandard Agitators (28” Props, 4 “U” Style Radiant Tube Burners (Bottom), 2 Trident Tube Burners (Top), 2 Zones with Temperture Controls, 2 Zones with Carbon Controls, 3 Rear Handlers, 1 Common Drive, Eclipse Burners & Recuperative, Atmosphere Sample System.
 
Atmosphere Temper:   Load Dimensions: 87” Wide X 87” LongX 36” High, Power: 480 V/3 Ph/60Hz Fuel: 1,500 CFH (1,500,000/Hr), 4 U-Tubes, Eclipse Burners & Recuperators. Maximum Temp.: 1,350°F. Controls: Allen Bradley PanelView PLC-5, Yokagawa Instruments. General: One (1) Combustion Blower, One (1) Common Drive, Two (2) Re-circulating Fans. Loaded and Unloaded by Charge Car,
Parts W
asher:
Heated (Forced Air) Rinse/Dry. Load Dimensions: 87” Wide X 87” LongX 36” High Power: 480 V/3 Ph/60 Hz. Fuel: 1,500,000BTU/Hr. Maximum Temperature: 180°F. Controls: Included, General: Includes Oil Skimmer & Filters. Charge Car is also Included. Line is Complete and in Good  Condition. 
Price:  $ 650,000 for Everything. 


Top





Item# 14-3819-1    (2) Two Atmosphere Integral Quench Furnaces:

Surface Combustion Batch IQ Furnace.
(2 available). S/N 12156-1. Working dimensions of 62” wide X 62” long X 36” high. Quench tank
                                            18’ wide X 10’ long X 7’ deep. Capacity 9500 US gallons. Power 480
                                            Volt, 3 phase, 60 cycle. Gas fired-4.6 million BTU/Hour. Maximum
                                             operating temperature 1850F. Two top mounted alloy re-circulating fans.
                                             2 Nitrogen flow meters, 2 for natural gas, 2 for air, 2 for propane and
                                             1 for endothermic atmosphere. All have Waukee-Tronic process controls.
                                             Allen Bradley Panelview PLC-5.  Yokogawa Controls. Four 30 hp gold
                                             standard agitators (28” props), 4 U Style radiant tube burners (bottom),
                                             2 Trident tube burners (top), 2 zones with temperature controls, 2 zones
                                             with carbon control, 2 rear handlers, 1 common drive, Eclipse recuperated
                                             burners, atmosphere sample system. Complete and in good condition.

Price:  $250,000/ Each.


Top






Item# 14-3815-1    Large Atmosphere Box Furnace:

Atmosphere Box Furnace. Manufactured by McLaughlin Services. S/N MS-11-604-01. Natural gas heated-2.8 MBTU’s/hour. Maximum operating temperature of 2000F. Voltage 480/3/60/100 Amps. Work area 166"W x 20"H top of piers to door arch, 32"H opening x 120"L. External dimensions; 16'W x 13'H x 14'L - Approx. Controls; Mounted and wired in a free standing panel includes an "Super Systems, Inc." (SSi) control system with HMI touchscreen interface. Front loading box furnace with an air operated vertical lift door. Furnace lining consists of ceramic fiber modules on the walls, roof and door. The floor is insulated with "IFB" Industrial Fire Brick. The furnace hearth consists of HT alloy rails and is designed to handle 4000 pounds @ 2000°F. There are two (2) roof mounted fans in this furnace to circulate heat and atmosphere. This furnace is equipped with two (2) Waukee Flo-Tronic Nitrogen Flowmeters. There are a total of ten (10) Kromschröder pulse firing recuperative burners that fire into "P" type radiant tubes. There are four (4) zones of control in this furnace. Excellent condition-like new. 
Price: $165,000   


Top






Item# 14-3752     Lindberg Atmosphere Integral Quench Furnace:

Electrically heated Lindberg Atmosphere Integral Quench Furnace,
Work Zone:  30" W x 48"D x 30"H
Features:  Internal Oil Quench,
                Top Cool capability
                Lindberg Corrtherm Heating Elements
Includes:  Transformers
               Buss Bars/Leads
               Gas Flow Panel
               Operator Mechanical Panel
Complete, except needs temperature controls and SCR's (We can help there)
Location:  Northern Indiana - at re-builder's shop.  Always Stored Indoors.
Price:  $25,000.  We load on your truck, or we can quote to deliver and install, etc. 

Top






Item# 14-3751-1    Large Gas-Fired Atm. Box Furnace:

Pacific Scientific Box Furnace. Working dimensions of 72" wide X 120" long X 42" high, Gas fired radiant tube, maximum operating temperature of 2050F. Model 723636-FL5, S/N P 24511F. Air operated vertical lift door, fiber lines, new refractory piers (12), hi-temp horizontal radiant tubes (6 above, 6 below), full safeties, side exhaust guard. Free standing control panel-prewired panel with Honeywell Tru-Trend circular chart and Honeywell digital controllers and overtemp. Comes with spare radiant tubes. Very good condition.
Price:  $70,000


Top






Item#   14-3742-1   Lindberg Atmosphere IQ Furnace:

Lindberg Batch IQ Furnace. Hevi-Duty, Clean Line, Model H66GH, S/N 102350. Working dimensions of 24” x 36” deep X 24” high. Maximum operating temperature 1850F. Gas fired 745,000 BTU’s. PLC controlled with oxygen probe. Air/Oil heat exchanger. Straight through design. Alloy and brickwork in great condition. 
Price:  $29,900.00

Top







Item# 13-3698   45" Tall Atmosphere Integral Quench Furnace:

1995 Beavermatic Atmosphere Integral Quench Furnace with 45" Tall Parts Capability,
Model:  64-45E1    
Condition:  Overall  -  Fair to Good  (Brick needs to be replaced, Radiant Tubes good.)
Work Zone:  36"W x 54"L x 45"H
Atmosphere:  Endothermic (generator not included)
Carbon Control System (Honeywell UDC Controller, Probe is SSI Gold Probe
Max. Temperature:  1850˚F    Uniformity:  +/- 25˚F from 1300˚F to 1750˚F
OEM Load Rating:  4,000 Pounds Gross Wt.   (Discuss with owner for history of loading)
Heating:  Electric Elements, 460V/3Ph/60Hz,  runs approx. 100 kW at 70% power setting
Breaker Size:  400 Amp for elements, 150 Amps for controls
Quench Heater and Quench Cooler Included
Air-cooled fan bearings
Footprint:  13ft W x 19ft L x 15ft H
Pit Required:  Currently in pit of 13ft W x 13ft L x 22in D, but could be only 11-12ft L
Distance Between Roller Rails:  21" Centers
Hearth Height above Shop Floor:  49.5"
Load Cart and Grids:  Not included with furnace
This furnace is now in storage, but it's companion is still in in operation and
can be demonstrated on your parts.
Available for inspection in Pacific Northwestern U.S.  Immediate Availability.
Price:  $25,000  (Price Reduced Oct 2016 for Quick Sale)
Top







Item# 12-3639   Lindberg Electric Atmosphere IQ Furnace:

Lindberg 24"x 36" x 18"H Electric Integral Quench Amosphere furnace,
Available As-Is for $28,000 or we can quote it rebuilt.  Price cut because
owner need space.  Has Top Cool, Corrotherm elements, Needs new controls.
Price As-Is:  $28,000     Location:  Mid-Western U.S.



Item# 13-3692-2   Rotary Hearth Furnace System with Quench Press:

(See Continuous Furnace Page)





Item 13-3689-2:   250 CFH Ammonia Dissociator:

Sargeant & Wilbur Electric Ammonia Dissociator
Size:  250 CFH
S/N:  5302D-AD
1750˚F, 240V/1-Phase/60Hz
More information available on request
Price:  $3,500                Location:  Mid-Western U.S.


Top






Item# 13-3688-2:   3000 CFH Ammonia Dissociators:

Sargeant & Wilbur Electric Ammonia Dissociators,
Model:  GAD3000
S/N:  9405-M2-AD;  9803-M2-AD;  20002-M6-AD-V
Four (4) Units Available, Each is 3,000 CFH
1750˚F, 60 kW, 230V/3Phase/60 Hz
More information available on request.
Price:  $ T.B.A./Each           Location Mid-Western U.S.

Top






Item# 13-3682     Atmosphere Furnace with Internal Gas-Quench Capability:

L&L Special Furnace Co. Model AQ 524-H596-1-F80-20853N, Atmosphere Furnace
with Internal Gas-Quench capability, 2000F, Work Zone:  16"W x 14"H x 26"D,
Electrically Heated, 208V/3Ph/60Hz, Full Load Amps:  71.5  30kW, Needs no retort,
Nichrome heating elements.  Has cast alloy roller rails for load movement.  Pneumatic
inner door and outer door.  Pneumatic load pusher.  Ideal for hardening air-quench alloys
such as D2. Capable of operation with Air, Nitrogen or Argon.  Honeywell controls with
Allen Bradley SLC100 PLC.  Drawing No. 4596-1, Serial No. J1186TS.       
Location:  Pacific Northwestern U.S.           
Price:  $9,500         Price Reduced 8/15/13          Location:  Pacific Northwestern U.S.


Top





Item# 12-3642:  New Titanium Water-Quench Furnace:

New, Never Used,
Lucifer, Model# 5EQ-024, S/N 7332, Atmosphere Water-Quench
furnace.  Designed for Titanium heat treating but could use for any suitable materials.
Work Zone: 18"W x 18"H x 24"L
Max. Design Temperature:  1900F
Power:  460V/3Ph/60Hz or 230V/3Ph/60Hz
Heating Power:  31 kW
Max. Load:  Approx. 120 lb
Muffle:  Inconel
Controller:  Eurotherm 2404 Temperature Control
Footprint: 52"W x 96"L x 100"H
Hearth Level: 40" above floor
Inert Atmosphere: 225-302 CFH @ 5 PSIG
Quench Tank: 205 gallons
Air Pressure: 80 psi
Ship Wt.: 7300 lb
The manufacturer can still support this furnace.
Price:  $19,500                      Location:  Pacific Northwestern U.S.

Top

 

Item # 07-3299  -  New Portable Digital Dewpoint Instruments:

New Super Systems, Inc. Model DP2000 Portable Dewpoint Analyzers from stock,
Dew Point range:  0 to 80°F,  (-18 to 27°C) 
Resolution:  +/- 1°F (+/- 0.1°C)
Accuracy and Repeatability:  +/- 1°F (+/- 0.1°C)
Warm-up:  Approx. 1 minute
Power:  Battery Operation, Recharge with 110V or 220 VAC, 60 Hz
Operating Temperature: 
0 to 120°F,  (-18 to 49°C)

Takes the guesswork out of measuring dewpoint. Reduces error between readings
and between operators.  Battery typically lasts a full shift and recharges quickly.
Price:  On Request

 

Top

 

 

                                      

 

Questions?

If you have questions on the items on this page, please email us at sales@gvtinc.com or give
us a call at 208-765-6854 Pacific Time Zone. Be sure to include the item number for reference.