back to Used Equipment

Generators & Dissociators
(Also see Atmosphere Page)

 


Used Generators

Item # Brand Description CFH Price
16-4056 Sunbeam 3000 CFH Endo Generator 3000 $22,500
16-4055 Lindberg Ammonia Dissociator 1000 $11,500
16-3968 Surface 5000 CFH Endo Generator 5000 $31,000
16-3967 Surface 2400 CFH Endo Generator 2400 $25,000
16-3929 JL Becker 9000 CFH Endo Generator 9000 $75,000
16-3928 Pacific Sci. 3000 CFH Gas-Fired Endo Gas Generator 1950F 3000 Call
16-3927 Lindberg 1500 CFH Hevi-Duty Endo Generator 1500 $7,000
16-3925 Surface 6000 CFH "Multi-Bottle" Endo Generator 6000 $50,000
16-3924 Surface 2400 CFH Endo Generator, two retort "multi-bottle" 2400 $59,000
16-3923 Surface 2400 CFH Gas-Fired Endo Gas Generator 1950F 2400 $25,000
16-3922 Surface 3600 CFH Gas-Fired Endo Gas Generator 1950F 3600 $29,000
14-3846 Gebruder Hammer 1000 CFH Endothermic Gas Generator, 120 m³/hr 1000 €43,000
14-3790 Can Eng 3600 CFH Gas-Fired Endo Generator w/C. Control 3600 $9,000
14-3759 Lindberg Gas-Fired 4500 CFH Endothermic Gas Generator 4500 $17,500
14-3758 GE 2 Each, Gas-Fired 1500 CFH Exo Generators 1500 $9,500/Ea.
14-3756 Surface 2 Ea, 7500 CFH Endo Generators w/ Turndown, 1950F 7500 $75,000/Ea.
14-3755 Sgt. & Wilbur 4 Each, 3000 CFH Ammonia Dissociators, 1750F 3000 $29,500 Ea.
13-3695 Surface 3600 CFH Gas-Fired Endo Generator, 2050F 3600 $24,900
12-3650 Gasbarre/Si. 3000 CFH Electric Endo Generator 3000 $29,500

 

 

 

Item# 16-4056-1    Endothermic Generator 3,000 CFH:

Manufactured by Sunbeam, model # ENG-30, S/N F-377-79.
Gas fired, operating temperature of 1900F.
Temperature Controls:  Upgraded controls. Honeywell digital indicating controller and overtemp.
Single alloy retort. Selas compressor. Waukee flowmeters. Air cooled. Package burner. Complete combustion controls and safeties. 
Good condition.

Price:   $22,500

Top

 

 

 

 

Item# 16-4055-1    Ammonia Dissociator 1,000 CFH:

Manufactured by Lindberg.
1,000 CFH.
Model Number: 16-1000-HYAM.
Serial number 26004.
Electrically heated, 460/3/60, 30 KW, 37.6 amps.
Operating Temperature:  2000 deg.F.
Temperature Controls: Honeywell indicating controller and overtemp.
Standard Lindberg design with vertical sealed catalyst chamber. Ceramic fiber insulation. Nichrome heating elements. Air cooled heat exchanger. Includes pressure gauges, SSOV, Waukee DA flowmeter.
Includes operating manual and drawings. 
Very good condition. Unit is complete and guaranteed operational.

Price:   $11,500

Top

 

 

 

 

 

Item# 16-3968-1    Endothermic Generator 5,000 CFH:

Serial number AC 42332-1A. Maximum temperature 1950F. Barber-Coleman controls with digital recorder and over temp. Air cooled. Shipping dimensions of 8’5” W X 10’1” high X 8’11” long. Very good condition. Included is a new pump.
Price:   $31,500

Top

 

 

 

Item# 16-3967-1    Endothermic Generator 2,400 CFH:

Manufactured by Surface in 1990 this unit was rebuilt by Park Thermal. Two retorts, gas fired with an operating temperature of 1950F. Air cooling. SSI Atmosphere controls. Complete and in good condition. Currently in storage.
Price:   $25,000

Top

 

 

 

Item# 16-3929-1    Endothermic Generator 9,000 CFH:

Endothermic Generator 9,000 CFH. Manufactured by the JL Becker company this is a 3 retort, 9,000 CFH endothermic generator. Designed so that each retort can be shut down independent of the others. Air cooling. Control via PLC with touch screen interface. Currently installed but not in operation. Complete, in good shape and ready to operate.
Price:   $75,000

Top

 

 

Item# 16-3928-1    Pacific Scientific Endothermic Gas Generator:

Natural gas, Model # PGF 3000-EN, Serial #416417, Max Temp 1950°F, Voltage 460/3/60, Work Area 3000 CFH, Dimensions: 42'W x 86"H x 106"L - Approx. Standard "Pacific Scientic" design Endothermic Gas Generator with water cooled shell & tube heat exchanger, Waukee vane pump, Waukee flow meters, atmospheric type ring burner. Generator just removed from service on 4/2015. Controls:Mounted and wired in an enclosure attached to the generator includes a Honeywell programmable logic controller (PLC) which controls all functions of the generastor. The PLC also monitors/controls temperature, dewpoint and flow. There is a Honeywell digital high limit mounted in the same enclosure. This generator has a "Waukee" rotary vane pump and "Waukee" ratio tronic digital flow controls. This generator is also equipped with a "Nova" dewpoint system. Available immediadely and in very good condition FOB East Chicago, IN.
Please call for pricing.

Top

 

 

Item# 16-3927-1    Lindberg Hevi-Duty Endo Generator:

Lindberg endothermic generator. 1500 CFH. Fair condition but complete.
Price:   $7,000       

Top

 

 

 

 

 

Item# 16-3925-1    Surface Combustion “Multi-Bottle” Endo Generator:

6,000 CFH, 2 retorts. Model # RX-2T-ABES, S/N CU-12592. Excellent condition with new catalyst. Also included is a brand new spare mixing pump.
Price:   $
50,000 as is or $75,000 repainted with a new SSI atmosphere control system and new retorts.

Top

 

 

 

Item# 16-3924-1    Surface Combustion 2400 CFH Endo Generator:

Two retort "multi-bottle" configuration allowing one retort to operate while the other is shut down for maintenance. New in 1995. S/N AC-43349-1. 2400 CFH capacity. Casemate controls, air cooling. Good condition. Currently installed and in operation but will be available shortly
Price:   $59,000       

Top

 

 

 

 

Item# 16-3923-1    Surface Combustion 2400CFH Endo Generator:

Size S-2N, S/N 413E. Maximum operating temperature of 1950F. Natural gas heated. 575 volts/3 phase. 1970’s vintage. SBS Endotherm cooler and SSI atmosphere controls. Catalyst and retorts are in good condition. Overall in very good condition. Currently in storage.
Price:   $25,000

Top

 

 

 

Item# 16-3922-1    Surface Combustion 3600 CFH Endo Generator:

Size S-3. Maximum operating temperature 1950F. Built October 1978. 575V/3phase/60 cycle. Three tube unit with fairly new catalyst and retorts. SBS Endotherm air cooler for gas and SSI atmosphere controls. Currently in storage. Overall in good condition.
Price:   $29,000        

Top

 

 

 

 

Item# 14-3846-1    Endothermic Gas Generator:

E013 GEBRUDER HAMMER Endothermic Generator. GEBRUDER HAMMER Endogas Generation Plant. Model Endogen 120-1.05-G, with dew point controller. Size;120 m3/hour (3600 CFH) or manually adjusted to 60 m3(1800 CFH) Shipping weight 4.000 kg.Dimensions ; LxWxH. 3600x2400x2800 mm. Year Built; 2001 Condition; Operational, very good. 
Price : 43.000 Euros ($ 58,500 USD)                       Location:  Europe                                

Top

 

 

 

 

Item# 14-3790    Gas-Fired Endothermic Gas Generator:

Can Eng Gas-Fired Endothermic Gas Generator, 3600 CFH,
OEM Order# 30505, S/N:  95869
Heat Input:  375,000 BTU/hr
Nat. Gas Pressure Req'd:  2-5 PSIG
480V/3Ph/60Hz,    4.5 Amp full load
Single retort 3600 CFH capacity. Unit is complete and installed.
SSI Carbon Control with AC-20 controller. Also includes air cooling.
Good
Condition
Price:  $9,000 or best offer

Top

 

 

 

 

Item# 14-3759-1    Gas-Fired 4500 CFH Endothermic Gas Generator:

Lindberg Endo Generator. 4500 CFH, gas fired. Retorts and brickwork are in excellent condition however it requires temperature controls and an air cooler (vendor has partially completed changing from water cooling to air).
Price:  $17,500.00                                                                                                                      

Top

 

 

 

Item# 14-3758-1    Two Each, 1500 CFH Exothermic Gas Generators:

Exo Generators (2 available). Model 9328312-G2, manufactured by General Electric. Gas fired, 1500 CFH capacity. Standard rich exo design. Units have newer Waukee flow meters. Selas pump, burner and fire check valve. Updated Honeywell digital controls for temperature, water and alarms. Good condition. 
Price:  $9,500/each.                                                                                                                    

Top

 

 

 

Item# 14-3756-1     2 Each, 7500CFH Endo Generators with SSI & Turndown:

Surface "Multi-Bottle" Endo Generators (2 available). Manufactured by Surface Combustion. Natural gas heated 675 CFH/HR. Model # RX 35-75-3V. Maximum temperature 1950F. 7500 CFH capacity.  Controls are complete, water cooled. SSi atmosphere controls and Atmosphere Engineering "EndoInjector". Very good condition, ready to go. 
 
Price:  $75,000/each.                                                                                                                

Top

 

 

 

Item# 14-3755-1     4 Each, Electric 3000 CFH Ammonia Dissociators:

Ammonia Dissociators (4 available). Built by Sargeant & Wilbur, 4 electrically heated
Ammonia Dissociators. Model GAD3000E. 3,000 CFH capacity. Maximum temperature 1750F.
Voltage 480/3/60/60 kW. External dimensions of 5'W x 6'H x 8'L.
Controls: Mounted and wired in a
free standing panel includes the following:
- Yokogawa UT 350 digital control for dissociator undertemp
- Yokogawa UT 350 digital control for dissociator overtemp.
- Yokogawa UT 350 digital control for dissociator temperature control
-  Two(2)Yokogawa UT 350 digital controls for vaporizer lower/upper zone
- Yokogawa UT 350 digital control for vaporizer overtemp
- All necessary signal lights, timers etc
Mounted in the same control cabinet are three (3) SCR's. Two (2) "Halmar Robicon" and one (1). "Ametek". One is for dissociator heating elements and the other two are for vaporizer lower/upper
zone heaters
Description: Electrically heated Ammonia Dissociator suitable for supplying up to 3000 CFH of atmosphere with a composition of 75% Hydrogen and 25% Nitrogen. This atmosphere is obtained by cracking anhydrous ammonia vapor in a catalyst filled vessel maintained at a temperature of 1700°F to 1850°F. Incoming ammonia pressure is reduced before retort entry. At the outlet of the retort the hot dissociated ammonia passes through a dry cooler where the gas is cooled to near room temperature. It then passes through a flowmeter and on to the consuming device. This dissociator includes a Sargeant & Wilbur Ammonia vaporizer. This dissociator is provided with two (2)catalyst filled heat resisting alloy retorts. The retorts are mounted within the insulated dissociator heating chamber. The heating chamber consists of heavy Mullite T-Slot tiles. Retorts are heated with Sinuous-wound Nichrome Ribbon Heating elements which are mounted in the tile slots. The element tails and studs extend through the rear wall of the dissociator. Elements can be removed throught the rear wall without having to unpack furnace insulation etc. A step-down transformer (480V to 240V 112.5 KVA) is included. Manuals and drawings are also included. Very good condition.                                                                                                                                     
Price:  $29,500.00 each

Top

 

 

 

Item# 13-3695    3600 CFH Endothermic Gas Generator:

Surface Combustion 3600 CFH Endothermic Gas Generator, Gas-fired, Has new catalyst
recently, 4 spare new North American burners, Operational. 
Ser. No.  C-3875-1
Max. Temp.:  2050˚F
720 cu. ft/hr fuel usage @ 5 PSI Pressure
Super Systems Carbon Probe on carbon control system
Location:  Pacific Northwestern U.S.
Price:  $ 24,900

Top

 

 

 

Item# 12-3650-1    3000 CFH Electric Endo Generator:

Gasbarre/Sinterite Furnace Division Endo Generator. 3000 CFH, electrically heated 460/3/60/63 Amps/50kW. New in 2006. External dimensions of 106" wide x 75" deep x 116" high. Controls are enclosed in a panel attached to the side of the generator. Honeywell UDC 3200 digital temperature controller and Honeywell UDC 2500 digital high limit safety. Control switches with indicating lights are flush mounted in the enclosure. Flange mounted fused disconnect switch for control power. Separate non fused disconnect for the main power. Waukee flow meters are manifold mounted for incoming and outgoing gases. Flow meters include: Natural Gas 0-1000 CFH, Air 0- 2500 CFH, (3) Mixed Gas 0-1500 CFH and Endo 0- 3500 CFH. Step down transformer for reduced voltage to the heating elements. Electrically heated 3 retort generator. Refractory lined shell with vertically mounted retorts. Total of twelve (12) silicon carbide heating elements, 6 on each side are mounted through the chamber for good uniform heating of the alloy retorts. The natural gas and air pass through a Waukee "mixor" valve then into the Waukee gas pump. Mixed gas enters the 3 "mixed gas" flow meters, through the Selas fire checks and enters the top of the retorts. The gas travels through the catalyst filled heated retorts and exits at the bottom. The exiting Endothermic gas passes through water cooled chambers then finned cooled air heat exchangers then through the Endothermic flow meter. A pressure regulator is supplied on the exiting gas piping. Good condition.
Price: $29,500.00                                                                                                                 
   

Top

 

 

Questions?

If you have questions on the items on this page, please complete and submit the form below.
Be sure to include the item number for reference.  You can also email us at bobgrammer1@gmail.com or give us a call at 208-765-6854 Pacific Time Zone.