Services

Used Equipment

generator

This generator works well for commercial products that require a protective atmosphere.  It produces a consistent endothermic gas and rarely needs to be adjusted. The owner is installing a generator with larger capacity so no longer needs this unit.

large_4396Panel.jpg

medium_4396Panel.jpg

small_4396Panel.jpg

thumbnail_4396Panel.jpg

4396Panel.jpg

large_4396Back.jpg

medium_4396Back.jpg

small_4396Back.jpg

thumbnail_4396Back.jpg

4396Back.jpg

large_4396Contollers.jpg

medium_4396Contollers.jpg

small_4396Contollers.jpg

thumbnail_4396Contollers.jpg

4396Contollers.jpg

large_4396End.jpg

medium_4396End.jpg

small_4396End.jpg

thumbnail_4396End.jpg

4396End.jpg

large_4396Front.jpg

medium_4396Front.jpg

small_4396Front.jpg

thumbnail_4396Front.jpg

4396Front.jpg

Tedesco Thermal Technology

3000 CFH Endothermic Generator

large_4358Front.jpg

medium_4358Front.jpg

small_4358Front.jpg

thumbnail_4358Front.jpg

4358Front.jpg

large_4358Controls.jpg

medium_4358Controls.jpg

small_4358Controls.jpg

thumbnail_4358Controls.jpg

4358Controls.jpg

large_4358PanelOpen.jpg

medium_4358PanelOpen.jpg

small_4358PanelOpen.jpg

thumbnail_4358PanelOpen.jpg

4358PanelOpen.jpg

large_4358Side.jpg

medium_4358Side.jpg

small_4358Side.jpg

thumbnail_4358Side.jpg

4358Side.jpg

large_4358System.jpg

medium_4358System.jpg

small_4358System.jpg

thumbnail_4358System.jpg

4358System.jpg

Atmosphere Engineering

1200 CFH Endothermic Generator

Description: Gas heated 2 retort generator. Refractory lined shell with vertically mounted retorts. Total of 5 Eclipse "Thermjet" spark ignited burners with UV scanner are mounted through the side of the refractory lined chamber for good uniform heating of the alloy retorts. The natural gas and air pass through a Waukee "mixor" valve then into the Waukee gas pump. Mixed gas enters the bottom of the retorts. The gas travels through the catalyst filled heated retorts and exits at the top. The exiting Endothermic gas passes through air cooled heat exchangers with cooling fans then through the Endothermic flow meters. Any excess exiting gas is burned off in flame rod monitored burn off
cans.

Controls: Honeywell UDC 3300 digital temperature controller. Honeywell UDC 2000 high limit and Honeywell UDC 5000 Dewpoint control along with all control switches and indicating lights are flush mounted in the control enclosure. Protection Controls 5 burner flame safety relay monitors all 5 burners. Two Honeywell flame safety relays monitor the 2 burn-off cans. Motor starters, fuses, timers, relays etc. are mounted inside the enclosure. Five (5) Waukee flow meters with pressure gauges are mounted to the front panel. 0-750 process gas, 0-100 addition gas, 0-2000 process air and (2) 0-2000 endothermic gas. Furnace Control Carbon probe.

medium_4357e.jpg

small_4357e.jpg

thumbnail_4357e.jpg

4357e.jpg

small_4357d.jpg

thumbnail_4357d.jpg

4357d.jpg

small_4357b.jpg

thumbnail_4357b.jpg

4357b.jpg

small_4357f.jpg

thumbnail_4357f.jpg

4357f.jpg

medium_4357c.jpg

small_4357c.jpg

thumbnail_4357c.jpg

4357c.jpg

Lindberg

medium_4356Corner.jpg

small_4356Corner.jpg

thumbnail_4356Corner.jpg

4356Corner.jpg

large_4356Front.jpg

medium_4356Front.jpg

small_4356Front.jpg

thumbnail_4356Front.jpg

4356Front.jpg

large_4356LeftClose.jpg

medium_4356LeftClose.jpg

small_4356LeftClose.jpg

thumbnail_4356LeftClose.jpg

4356LeftClose.jpg

large_4356Rear.jpg

medium_4356Rear.jpg

small_4356Rear.jpg

thumbnail_4356Rear.jpg

4356Rear.jpg

large_4356Right.jpg

medium_4356Right.jpg

small_4356Right.jpg

thumbnail_4356Right.jpg

4356Right.jpg

medium_4346.jpg

small_4346.jpg

thumbnail_4346.jpg

4346.jpg

medium_4346c.jpg

small_4346c.jpg

thumbnail_4346c.jpg

4346c.jpg

medium_4346b.jpg

small_4346b.jpg

thumbnail_4346b.jpg

4346b.jpg

medium_4346d.jpg

small_4346d.jpg

thumbnail_4346d.jpg

4346d.jpg

medium_4346a.jpg

small_4346a.jpg

thumbnail_4346a.jpg

4346a.jpg

Rogers Engineering

5600 CFH Endothermic Generator

medium_4055.jpg

small_4055.jpg

thumbnail_4055.jpg

4055.jpg

medium_4055a.jpg

small_4055a.jpg

thumbnail_4055a.jpg

4055a.jpg

medium_4055b.jpg

small_4055b.jpg

thumbnail_4055b.jpg

4055b.jpg

medium_4055c.jpg

small_4055c.jpg

thumbnail_4055c.jpg

4055c.jpg

Ammonia Dissociator 1,000 CFH

medium_3968b.jpg

small_3968b.jpg

thumbnail_3968b.jpg

3968b.jpg

medium_3968.jpg

small_3968.jpg

thumbnail_3968.jpg

3968.jpg

medium_3968a.jpg

small_3968a.jpg

thumbnail_3968a.jpg

3968a.jpg

medium_3968c.jpg

small_3968c.jpg

thumbnail_3968c.jpg

3968c.jpg

Surface Combustion

Endothermic Generator 5,000 CFH

small_3759FlowPanel.jpg

thumbnail_3759FlowPanel.jpg

3759FlowPanel.jpg

small_3759Rear.jpg

thumbnail_3759Rear.jpg

3759Rear.jpg

Gas-Fired 4500 CFH Endothermic Gas Generator

Surface "Multi-Bottle" Endo Generators (2 available))

small_3756Panels.jpg

thumbnail_3756Panels.jpg

3756Panels.jpg

small_3756Rear.jpg

thumbnail_3756Rear.jpg

3756Rear.jpg

medium_3756RearR.jpg

small_3756RearR.jpg

thumbnail_3756RearR.jpg

3756RearR.jpg

2 Each, 7500CFH Endo Generators with SSI & Turndown

Electrically heated Ammonia Dissociator suitable for supplying up to 3000 CFH of atmosphere with a composition of 75% Hydrogen and 25% Nitrogen. This atmosphere is obtained by cracking anhydrous ammonia vapor in a catalyst filled vessel maintained at a temperature of 1700°F to 1850°F. Incoming ammonia pressure is reduced before retort entry. At the outlet of the retort the hot dissociated ammonia passes through a dry cooler where the gas is cooled to near room temperature. It then passes through a flowmeter and on to the consuming device. This dissociator includes a Sargeant & Wilbur Ammonia vaporizer. This dissociator is provided with two (2)catalyst filled heat resisting alloy retorts. The retorts are mounted within the insulated dissociator heating chamber. The heating chamber consists of heavy Mullite T-Slot tiles. Retorts are heated with Sinuous-wound Nichrome Ribbon Heating elements which are mounted in the tile slots. The element tails and studs extend through the rear wall of the dissociator. Elements can be removed throught the rear wall without having to unpack furnace insulation etc. A step-down transformer (480V to 240V 112.5 KVA) is included. Manuals and drawings are also included. Very good condition.

generator Equipment

Tedesco 3000 CFH Endothermic Generator

Atmosphere Engineering 1200 CFH Endothermic Generator

Lindberg 3000 CFH Endothermic Generator

Lindberg 3000 CFH Endothermic Generator

Rogers 5600 CFH Endothermic Generator

Lindberg Ammonia Dissociator 1,000 CFH

Surface Combustion Endothermic Generator 5,000 CFH

Lindberg Gas-Fired 4500 CFH Endothermic Gas Generator

Surface Combustion 2 Each, 7500CFH Endo Generators with SSI & Turndown

Sargeant & Wilber 4 Each, Electric 3000 CFH Ammonia Dissociators